Quelltext der Seite Running the Program on the Raspberry Pi 5

== Preparing the SD Card ==
To create a bootable SD card for the Raspberry Pi 5, we first need an SD card formatted in FAT32.

=== Downloading the File ===
Download the following file from this GitHub repository https://github.com/raspberrypi/firmware/tree/master/boot:

*bcm2712-rpi-5-b.dtb

=== Copying the File to the SD Card ===
Copy the downloaded file to the SD card.

=== Creating config.txt ===
Create a file named config.txt on the SD card and add the following content:
<syntaxhighlight lang="shell">
arm_64bit=1
kernel_address=0x80000
enable_jtag_gpio=1
kernel=kernel_2712.img
framebuffer_depth=32
</syntaxhighlight>

=== Copying the Kernel File ===
Copy your kernel file kernel_2712.img to the SD card.

=== Inserting and Booting the SD Card ===
Insert the SD card into the Raspberry Pi 5 and turn it on.

On the first run of our program, not much may happen, but the fundamental steps are now complete.

-----

{| style="width: 100%;
| style="width: 33%;" | [[Introduction to C and Assembly Programming with the Raspberry Pi 5|< Back (Introduction to C and Assembly Programming with the Raspberry Pi 5)]]
| style="width: 33%; text-align:center;" | [[English|< Home >]]
| style="width: 33%; text-align:right;" | [[Working with Make and Linker Script|Next (Working with Make and Linker Script) >]]
|}